10,000-lb Two Post Floor Plate Auto Lift, Symmetric Arms, 77″ Lift Height

The TMG-TPL45 Two-Post Auto Lift is an excellent choice for personal garages, small shops or general automotive service departments. With a 10,000 lb lifting capacity and 77″ lift height you can easily lift most cars, trucks and SUVs for mechanical work of any kind. A floor plate design keeps all hydraulic, steel cable and electrical lines protected while opening up the overhead for maximum vehicle clearance. Specifications
Lift capacity: 10,000 lb
Overall height: 110″
Overall width: 134″
Outside column width: 124″
Inside column width: 110″
Crossing floor plate height: 1-¼”
Column size: 10-1/2″ x 7″
Column base: 20″ x 15″
Column steel: 6 GA
Carriage steel: 4 GA
Cable diameter: ?”
Lift height (pad only): 72″
Lift height (with 5″ adapter): 77″
Lift height clearance: 71″
Minimum height from the ground: 4-½”
Drive through clearance: 100″
Retractable front arm: 31-1/2″ – 48″
Retractable rear arm: 31-1/2″ to 48″
Travel speed:
Rise up at 90% load: 45 to 50 sec.
Lower down: 30 to 35 sec.
Max. load capacity per arm: 2,500 lb
Installation concrete slab required (minimum): 4-½” with 3000 PSI cured
Automatic arm restraints
Dual point lock release
Mounting hardware included
Requires 25A breaker
Hydraulic Motor Pump Power Unit:
220 VAC, 3 HP, single phase
No-load speed: 3360 RPM
Working pressure: 2600 PSI
Tank capacity: 2.5 US gal
Pump oil required: AW32/AW46
CETL certified